-
【性能與應用】
1、用于活性,分散等染料印花織物去除浮色,可在低溫下處理避免織物白地沾污,一般用量0.1~0.5克/升。
2、可以擦洗成品上的油污,特別對蠶絲成品的去油污斑點很有效。
3、用于分散還原等染料的染浴中作分散劑,用量以0.1~0.5克/升為宜。
4、用于腈綸纖維的染色前處理,洗滌油污,處理溫度50℃,滲透劑JFC用量0.8~1克/升。
5、用于腈毛混紡織物高壓~浴法染色工藝,一般用量0.5%左右。
6、滲透劑JFC洗滌力在40℃最好,用作乳化劑時,其用量為被乳化油重量的10%。
【包裝與貯運】
200Kg鐵桶、50Kg塑料桶包裝。按一般化學品貯存和運輸。貯存于干燥通風處。保質期二年。
-
1、本品在堿性條件下具有較強的脫脂、乳化、分散、滲透及凈洗力、耐氧化、還原劑,并對具有較好的穩定作用。
2、本品主要用于制造抗?jié)鈮A精練劑和絲光滲透劑等印染助劑。
-
-
【性能與應用】
1、易溶于水,溶液為乳白色,不耐強酸、強堿、重金屬鹽和還原劑,滲透快速、均勻,具有良好的潤濕、滲透、乳化、起泡性能。在40℃以下時滲透效果最好,在高溫時遇堿較易水解,適宜在40℃以下將織物先經滲透劑處理后再升溫。滲透劑T不耐強堿,不可直接加入濃堿液中,應先將堿液稀釋后再加入滲透劑T。
2、本品為高效滲透劑,用于處理棉、麻、粘膠及其混紡制品,處理后的織物不經煮練直接進行漂白或染色,可改善因死棉造成的染疵,印染后的織物手感更柔軟、豐滿。生坯練漂時,染料最好先行退盡以保證滲透效果。
3、滲透劑T使用時如發現泡沫太多,可加入少量消泡劑,GP或辛醇、磷酸三丁酯之類消泡。
4、用于原棉染色;用于農藥可濕性粉劑。
-
-
-
-
-
-
-
-